Zhiyun Crane V2 3 Axis Handheld Gimbal Stabilizer 3 32bit MCUs Brushless Motors with Encoders for Mirrorless Camera Sony A7 series/Panasonic LUMIX Series/Nikon J Series/Canon M Serie With Mini Tripod

The First Handheld Gimbal with CCI (Camera Control Interface), thus the camera’s shutter and focus can be controlled by the buttons on gimbal’s handle. 3 operation modes. Quick, simple and tool-less camera mounting system saves time and effort.
3 Axis 360 Degree Unlimited Rotation. With the automotive grade magnetic encoders attached to each motor, the gimbal can sense every 0.02-degree change intervals. Any shooting requirements will be perfectly satisfied, i.e. positive grip, upright shooting, low angle, high flight photography.
The industry’s first to achieve three 32-bit MCUs running in parallel at incredible 4k hertz. Powerful MCUs (Microcontroller Unit) combined with Zhiyun’s efficient attitude control algorithm and advanced servo control algorithm, the gimbal is able to sense, compute then control the camera to a 0.01-degree accuracy, within 0.25 millisecond.

About Upgrading (^o^)/~
We recommend you upgrading the gimbal by connecting to computer as an alternative of mobile phone.
Even as upgrading the gimbal, please make certain that the battery power is adequate.
1. Go to Zhiyun Official Website online. Go to “Enhance” after which click “Download”.
2. Download these three files: Zhiyun USB Driver, Tools and the up to date firmware.
3. Download and Read the “Firmware upgrade Description”, that allows you to assist you to upgrade the stablizer step-by-step smoothly.

Zhiyun Crane
Dimension(L*W*H): 154mm*159mm*389-402mm
Weight: 950g (Battery excluded)
Payload weight: 350-1800g
Operation current: 80mA-6000mA
Operation temperature: 0-45 Celsius
Run-time: 6-12h
Tilt/Roll/Pan axis mechanical movement range: 360 degree
Maximum payload lens: 70mm lens
Zhiyun Li-ion battery
Model: 26500 Li-ion
Capacity: 3600mAh
Voltage: 3.7V
Battery weight: 42g (single)
Maximum charging current: 800mAh

Mini Tripod
Made of Durable Mg-Al Alloy, Compact, Lightweight and Corrosion Resistant.
Wide loading platform for better loading capacity(Max. Load: 5.9Lb/2.7kg) and low angle macro shooting.
The ball head can swivel 360 degrees & tilt 90 degrees.
Easy for attaching and detaching with camera by the use of the 1/4″ threaded screw.
Non-slip rubber feet design for protected to make use of, and mini folded size design for simple to carry.

Package Contents:
1* Crane Gimbal
1* Lens support
1* Lens Enhance screw
1* Camera Mounting screw
1* Micro USB cable
1* Battery Charger
2* 26500 Li-ion Batteries
1* Carry Case
1* User manual
1* Quick-Release Plate
1* PERGEAR Mini Tripod
1* Pergear Cleaning Kit
The First Handheld Gimbal with CCI (Camera Regulate Interface), thus the camera’s shutter and center of attention can also be controlled by the buttons on gimbal’s maintain. 3 operation modes. Quick, simple and tool-less camera mounting system saves effort and time.
3 Axis 360 Degree Unlimited Rotation. With the automotive grade magnetic encoders attached to each and every motor, the gimbal can sense each and every 0.02-degree change intervals. Any shooting requirements shall be perfectly satisfied, i.e. positive grip, upright shooting, low angle, high flight photography.
The industry’s first to reach three 32-bit MCUs running in parallel at implausible 4k hertz. Powerful MCUs (Microcontroller Unit) combined with Zhiyun’s efficient attitude Regulate set of rules and advanced servo Regulate set of rules, the gimbal is in a position to sense, compute then Regulate the camera to a 0.01-degree accuracy, within 0.25 millisecond.
Built-in wireless Regulate module can also be connected with Zhiyun’s gimbal remote controller or smartphone APP which will also be used for wireless Regulate and firmware upgrade. Supports 2 X 26500 Batteries(Included), provides 6 hours and 12 hours operating time respectively.
Weights only 2Lb/950g, compatible with Mirrorless Cameras weights between 0.77Lb/350g and 3.96Lb/1800g. With the 3/8″ to 1/4″ Screw Adapter on the bottom, the Crane can also be matched with more than one filming accessories, i.e. tripod, extension rod, cupula, or hand held/worn to make delay shooting and create the effect of rocker arm.

Reviews

There are no reviews yet.

Be the first to review “Zhiyun Crane V2 3 Axis Handheld Gimbal Stabilizer 3 32bit MCUs Brushless Motors with Encoders for Mirrorless Camera Sony A7 series/Panasonic LUMIX Series/Nikon J Series/Canon M Serie With Mini Tripod”

Your email address will not be published. Required fields are marked *