Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer 3 32Bit MCUs Brushless Motors With Encoders for Mirrorless Camera Sony A7 Series Panasonic LUMIX Series Nikon J Series Canon M Series

The First Handheld Gimbal with CCI (Camera Control Interface), thus the camera’s shutter and focus can be controlled by the buttons on gimbal’s handle. 3 operation modes. Quick, simple and tool-less camera mounting system saves time and effort.
3 Axis 360 Degree Unlimited Rotation. With the automotive grade magnetic encoders attached to each motor, the gimbal can sense every 0.02-degree change intervals. Any shooting requirements will be perfectly satisfied, i.e. positive grip, upright shooting, low angle, high flight photography.
The industry’s first to achieve three 32-bit MCUs running in parallel at incredible 4k hertz. Powerful MCUs (Microcontroller Unit) combined with Zhiyun’s efficient attitude control algorithm and advanced servo control algorithm, the gimbal is able to sense, compute then control the camera to a 0.01-degree accuracy, within 0.25 millisecond.

Usually ships in 24 hours

About Upgrading (^o^)/~
We advise you upgrading the gimbal by connecting to computer as an alternative of mobile phone.
Whilst upgrading the gimbal, please make certain that the battery power is adequate.
1. Go to Zhiyun Official Web site. Go to “Make stronger” after which click “Download”.
2. Download these three files: Zhiyun USB Motive force, Tools and the up to date firmware.
3. Download and Read the “Firmware upgrade Description”, so as to will let you upgrade the stablizer step-by-step smoothly.

Zhiyun Crane
Dimension(L*W*H): 154mm*159mm*389-402mm
Weight: 950g (Battery excluded)
Payload weight: 350-1800g
Operation current: 80mA-6000mA
Operation temperature: 0-45 Celsius
Run-time: 6-12h
Tilt axis mechanical movement range: 360 degree (unlimited rotation)
Roll axis mechanical movement range: 360 degree (unlimited rotation)
Pan axis mechanical movement range: 360 degree (unlimited rotation)
Compatible cameras: Almost all mirrorless cameras
Maximum payload lens: 70mm lens
Zhiyun Li-ion battery
Model: 26500 Li-ion
Capacity: 3600mAh
Voltage: 3.7V
Battery weight: 42g(Single)
Maximum charging current: 800mAh
Zhiyun Li-ion battery charger
Type: 26500 Li-ion battery charger
Input voltage: 5V
Charging current: 800mA
Carry Bag Dimension: 36*11*31.5cm

PACKAGE CONTENTS:
1* Crane Gimbal
1* Lens support
1* Lens Make stronger screw
1* Camera Mounting screw
1* Micro USB cable
1* 26500 Li-ion battery charger
2* 26500 Li-ion batteries
1* Battery box
1* carry bag
1* User manual
1* Pergear Clean Kit
The First Handheld Gimbal with CCI (Camera Keep watch over Interface), thus the camera’s shutter and center of attention will also be controlled by the buttons on gimbal’s maintain. 3 operation modes. Quick, simple and tool-less camera mounting system saves effort and time.
3 Axis 360 Degree Unlimited Rotation. With the automotive grade magnetic encoders attached to each and every motor, the gimbal can sense each and every 0.02-degree change intervals. Any shooting requirements might be perfectly satisfied, i.e. positive grip, upright shooting, low angle, high flight photography.
The industry’s first to succeed in three 32-bit MCUs running in parallel at implausible 4k hertz. Powerful MCUs (Microcontroller Unit) combined with Zhiyun’s efficient attitude Keep watch over set of rules and advanced servo Keep watch over set of rules, the gimbal is in a position to sense, compute then Keep watch over the camera to a 0.01-degree accuracy, within 0.25 millisecond.
Built-in wireless Keep watch over module will also be connected with Zhiyun’s gimbal remote controller or smartphone APP which may also be used for wireless Keep watch over and firmware upgrade. Supports 2 X 26500 Batteries(Included), provides 6 hours and 12 hours operating time respectively.
Weights only 2Lb/950g, compatible with Mirrorless Cameras weights between 0.77Lb/350g and 3.96Lb/1800g. With the three/8″ to at least one/4″ Screw Adapter on the bottom, the Crane will also be matched with a couple of filming accessories, i.e. tripod, extension rod, cupula, or hand held/worn to make delay shooting and create the effect of rocker arm.

Reviews

There are no reviews yet.

Be the first to review “Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer 3 32Bit MCUs Brushless Motors With Encoders for Mirrorless Camera Sony A7 Series Panasonic LUMIX Series Nikon J Series Canon M Series”

Your email address will not be published. Required fields are marked *