X1N TTL Wireless Flash Trigger for Nikon
Featuring multi-channel triggering, stable signal transmission, and sensitive reaction.
Applies to hotshoe-mounted Nikon series cameras, in addition to the cameras which have PC sync sockets.
With X1N wireless flash trigger, Prime speed synchronization is to be had for so much of camera flashes out there which strengthen I-TTL.
The max flash synchronization speed is as much as 1/8000s. 1/8000s is ONLY achievable for cameras have a max camera shutter speed of one/8000s.
Flash Mode: Wireless off, M/Multi
Guide No. (m ISO one hundred): 87
Flash Duration: 1/220 to at least one/10000 seconds
Power Output: 9 steps：1/256~1/1
Stroboscopic Flash: Supplied(as much as 100 times, 100Hz)
Sync Mode: Prime-speed sync, first-curtain sync, and second-curtain sync
Delay Flash: 0.01~30 seconds
Modeling Lamp(LED): 10W
Optical Slave Flash: S1/S2
Flash Duration Indication: √
Display: Dot-matrix panel
Wireless Flash Serve as: Slave, Off
Controllable Vary(approx.): 2.4G, 5: A,B,C,D,E
Transmission Vary(approx.): 2.4G, 80m
Channels: 2.4G, 32: 1~32
Power Provide: Lithium battery(11.1V/8700mAh)
Full Power Flashes: 500
Recycle Time: Approx. 0.01~2.5s
1* 32″ 5-in-1 Reflector
1* Flash Color Filter
1* 32″ Translucent Umbrella
1* Pergear Cleaning Kit
1* Flash Softbox
1* Godox X1N Trigger
2* Reflector Disc Holder Clip
2* AD600BM Main Flash
2* Lithium Battery Pack
2* Lamp Cover
2* Flash tube
2* Battery Charger
2* Power Cord
2* Instruction Manual
2* Godox AD-R6 Reflector
1* Godox 600W Lamp Head
1* Godox PB-six hundred Moveable Bag
600Ws, GN87, 9 steps of power adjustment(1/1 to at least one/256). Stable color temperature at 5600±200K over all of the power Vary.
Fully strengthen Prime-speed sync (as much as 1/8000 seconds), first-curtain sync, and second-curtain sync.
Optical and Built-in 2.4G wireless transmission to provide stable output. 80M Wireless Keep an eye on with precision.
11.1V/8700mAh Massive capacity lithium battery pack to offer 500 full power flashes and recycle in 0.01-2.5 second. DC/AC are both applicable(Change to AC alternating current module after lithium battery pack detached).
10W LED modeling lamp can adjust light brightness in three steps. Massive and transparent dot-matrix LCD panel gives convenient operation. With deal with to regulate other shooting instructions of the flash. USB firmware upgrades is helping stay pace with the recent technology.