Sale!

AGPtek LKV372A 60m/190ft 1080P HD HDMI Network Extender Over Single Cat6/6a/7 Ethernet Cable with IR Remote Control

This HDMI extender supports 1080P HD, HD Audio, 3D; 20~60KHz wide Frequency, IR remote control(IR Signal input to connect with IR receiver extension cable. HDMI Single cable transmission:It extends HDMI 1080P AV signal to at least 60M by cat6 or higher level cables
HDMI Lossless transmission:It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection
Auto adjustment to Match cable Length:Adjust the specification automatically for different cable lengths 1-60m to achieve the best display; For better performance, we suggest to use cable longer than 15meters/45ft or above

Usually ships in 24 hours

Description:
The HDMI extender over a single UTP cables with IR keep an eye on is learn how to send your HDMI signal over long distances. As an alternative of the use of expensive HDMI cables, this device means that you can use your existing Cat6/7cables/sockets even as also performing the similar functions like transferring Deep Color video and new lossless compressed audio. And if that were not enough, you’ll be able to use your existing remote to keep an eye on your device through an IR blaster.

Specification:
HDMI signal: Comply HDCP
Resolution supported: [email protected], [email protected], [email protected], [email protected], [email protected]/60Hz, [email protected]/60Hz, [email protected]/60Hz Network cable: Low resistance and consumption oxygen-free copper core(CAT6、CAT6A、CAT7)
Transmission length: CAT6:60m at 1080P
IR remote keep an eye on: Reinforce 20~60KHz wide frequency IR remote keep an eye on
Working temperature: 0℃~60℃
power: DC5V/1A
power consumption: TX:2W; RX<2W
Product size: 2.82(W) x 2.62(D) x0.98(H)inch

Package Contents:
1 x HDMI to RJ45 sender TX
1 x RJ45 to HDMI receiver RX
2 x DC5V/1A power
1 x User manual
1 x IR blaster extension cable
1 x IR receiver extension cable

Note:
1.Top of the range cat6 or cat6a cable is had to work with this hdmi extender,preferably longer than 15 meters/45ft or above
2.Simplest supports the PCM audio output
3.Don’t mix up HDMI to RJ45 sender and RJ45 to HDMI receiver before installation.
4.Don’t hot plug when It’s working.
5.Be certain that the cables in right connection.
6.Please press RX RESET button when no image output.
7.Please Be certain that the cables follows 568B and reset TX/RX to input HDMI Signal when RX”LINK” Led is flashing at all times.
This HDMI extender supports 1080P HD, HD Audio, 3D; 20~60KHz wide Frequency, IR remote keep an eye on(IR Signal input to hook up with IR receiver extension cable. HDMI Single cable transmission:It extends HDMI 1080P AV signal to no less than 60M by cat6 or upper level cables
HDMI Lossless transmission:It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection
Auto adjustment to Match cable Length:Adjust the specification routinely for various cable lengths 1-60m to succeed in the most productive display; For better performance, we recommend to make use of cable longer than 15meters/45ft or above
Pure Hardware Transmission: It’s pure hardware design.No use motive force &plug and play. Full HD Transmission:Adopt full HD transmission technology to make the video image more vivid
Installation Requirements:HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment and the like); HDMI display device like SDTV, HDTV, projector with HDMI port; UTP/STP cat6/6A/7 cable, follow usual IEEE-568B

Reviews

There are no reviews yet.

Be the first to review “AGPtek LKV372A 60m/190ft 1080P HD HDMI Network Extender Over Single Cat6/6a/7 Ethernet Cable with IR Remote Control”

Your email address will not be published. Required fields are marked *